News - Filmgear-united.com

Lavalier microphone for use with wireless transmitters or mini recorders like the Tascam DR-10 series
Ideal to capture clear voice in applications such as theatre, television, lectures, public speaking and other situations where hands-free operation is required
Included clip allows attachment to collars, ties or other clothing
Screw-lockable 3.5-mm mini-jack allows firm and secure connection (can also be used without screw-lock)
Small, unobtrusive body
Available in black (TM-10LB) or white (TM‑10LW) Can withstand high sound pressure levels up to 115 dB SPL
Windscreen included
Tested Tascam hardware: DR-10L, DR-10CS, DR-05, DR-07MKII, DR-100MKII, DR-100MKIII, DR-60D, DR-70D, DR-701D

Element: Back-electret condenser
Polar pattern: Omnidirectional
Power supply: Plug-in power (1,5–10 V)
Frequency response: 50 Hz – 18 kHz
Sensitivity: –42 dB (0 dB = 1 V/Pa at 1 kHz)
Cable length: 160 cm
Dimensions (Ø × L): 6.5 mm × 22 mm
Weight: 240 g

https://www.dsttl.com/index.php/audio/tascam/13092/tascam-tm-10l-lavalier-microphone-with-screw-lock-connector-detail

New: Tascam ML-32D 32-Channel Analogue/Dante Converter

Details: Published on Thursday, 01 March 2018 14:23

ML-32D

https://www.dsttl.com/index.php/audio/tascam/13091/tascam-ml-32d-32-channel-analogue-dante-converter-detail

Analogue-Dante-Analogue converter for 32 line-level audio channels
Dante interface allows up to 32 audio channels to be transferred over an Ethernet network
Two LAN connectors for primary and secondary networks provide redundancy
Flexible routing with ”Dante Controller” software
AES67 is supported to allow connection with Ravenna and other compatible audio network technologies
Up to 96 kHz sampling rate and 24 bit resolution
Indicators for operation status and current sample rate
Overload indicators for analogue input signals, signal indicators for analogue input and output signals
Five different reference levels available (selectable via rear side switches)
25-pin D-sub connectors for balanced line inputs/ outputs (AES59-2012:TASCAM pin assignment)
Euro Block breakout box can be used for fixed installation (BO-32DE)
XLR breakout boxes can be used for live or studio applications (BO-16DX/IN, BO-16DX/OUT)
19-inch rack-mountable chassis (1U)

Audio resolution: 44.1/48/88.2/96 kHz, 16/24 bit
Frequency response (analogue in to Dante out): 20 Hz – 40 kHz, +0.1 dB / –0.5 dB
Distortion (THD+N): ≤0.001 %
S/N ratio: ≥113 dB
Crosstalk: ≥115 dB
Reference level (selectable): +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu
Network standard: Gigabit Ethernet, 1000BASE-T (IEEE 802.3ab)
Power supply: AC 100–240 V, 50/60 Hz
Power consumption: 22 W
Dimensions (W × H × D): 483 mm × 45 mm × 304 mm
Weight: 3.5 kg

New: Tascam ML-16D 16-Channel Analogue/Dante Converter

Details: Published on Thursday, 01 March 2018 14:14

ML-16D

https://www.dsttl.com/index.php/audio/tascam/13090/tascam-ml-16d-16-channel-analogue-dante-converter-detail

Analogue-Dante-Analogue converter for 16 line-level audio channels
Dante interface allows up to 16 audio channels to be transferred over an Ethernet network
Two LAN connectors for primary and secondary networks provide redundancy
Flexible routing with ”Dante Controller” software
AES67 is supported to allow connection with Ravenna and other compatible audio network technologies
Up to 96 kHz sampling rate and 24 bit resolution
Indicators for operation status and current sample rate
Overload indicators for analogue input signals, signal indicators for analogue input and output signals
Five different reference levels available (selectable via rear side switches)
25-pin D-sub connectors for balanced line inputs/ outputs (AES59-2012:TASCAM pin assignment)
Euro Block breakout box can be used for fixed installation (BO-32DE)
XLR breakout boxes can be used for live or studio applications (BO-16DX/IN, BO-16DX/OUT)
19-inch rack-mountable chassis (1U)

Audio resolution: 44.1/48/88.2/96 kHz, 16/24 bit
Frequency response (analogue in to Dante out): 20 Hz – 40 kHz, +0.1 dB / –0.5 dB
Distortion (THD+N): ≤0.001 %
S/N ratio: ≥113 dB
Crosstalk: ≥115 dB
Reference level (selectable): +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu
Network standard: Gigabit Ethernet, 1000BASE-T (IEEE 802.3ab)
Power supply: AC 100–240 V, 50/60 Hz
Power consumption: 14 W
Dimensions (W × H × D): 483 mm × 45 mm × 304 mm
Weight: 3.3 kg